• Newsroom
  • Contact
  • safe&easy
  • DE EN PL
Results out of Read more Products View all results


Share this page

You can share this page with others by sending the URL of the selected page.

email LinkedIn
FLBB FLBB Power Strip with Line Filter en IM0012234
CH version
No longer available
FLBB FLBB Power Strip with Line Filter en IM0012233
EU version
FLBB FLBB Power Strip with Line Filter en IM0012234
FLBB FLBB Power Strip with Line Filter en IM0012233

Series: FLBB

EMC Power Strip with Line Filter


Last order possibility: 30.09.2019

2 Variants

Connectors (Inlets/Outlets)

Typ 13
Connector Logo
CEE 7 / IV
Connector Logo


  • Distribution unit with 5 outlets,
  • Line Switch with neon indicator
  • Line-filter according IEC 60939


  • Protects all connected equipment from high frequency interference
  • Limits the peak voltage and increases the system reliability
  • Suitable for appliances according IEC 60950

Rated current

10 / 16 A @ 40 °C

Rated Voltage

250 VAC

Impulse Withstand Voltage

Impulse Withstand Voltage

Information about the maximum permissible surge voltage. Thus, the operating limit with high energy pulses, such as Lightning strikes, short circuits or switching operations tested and classified.
Impulse Withstand Voltage

> 6 kV

Leakage Current

Leakage Current

The leakage current is an electric current flowing in an undesirable current path. In EMC filters this is done by the applied Y-capacitors, which are used for noise suppression. Information on the amount and classification of leakage currents are explained in detail and are listed in the data sheets.
Leakage Current

standard < 0.5 mA (250 V / 50 Hz)

Protection against electric shock

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information
Protection against electric shock

Suitable for appliances with protection class I acc. to IEC 61140

Line Switch

Line Switch

Also includes circuit breaker switch and switch for Bowden cables.

Details about the switches can also be found in the general product information.
Line Switch

Rocker switch, illuminated, acc. to IEC 61058-1
Technical Details



The term MTBF is the English acronym Mean Time Between Failure and describes reliability of a component. The operating time of a system can be calculated based on thementioned value of the component. - The higher this value, the more reliable the component.

> 300'000 h acc. to MIL-HB-217 F

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Product standards

Product standards that are referenced

Organization Design Standard Description
Partners IEC_Certification_Body Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Partners IEC_Certification_Body Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Partners IEC_Certification_Body Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference
Partners IEC_Certification_Body Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Partners UL_Certification_Body Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Partners UL_Certification_Body Designed according to UL 1283 Electromagnetic interference filters
Partners CSA_Certification_Body Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Partners CSA_Certification_Body Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters

Application standards

Application standards where the product can be used

Organization Design Standard Description
Partners IEC_Certification_Body Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment.


The product complies with following Guide Lines

Identification Details Initiator Description
Approval marks CE Selbsteklaration SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
Environment_Safety RoHS_Logo_color_CMYK_tif SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
Environment_Safety China_RoHS_e_konform_eps SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
Environment_Safety REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.


Picture(s) Selection of product pictures to display a specific variant of the type


Type Corresponds to a product series and includes various distinct variants. On the type of descriptive data are summarized, eg in the data sheet

Order Number

Order Number Unique part number for placing an order

Configuration key

Configuration key The configuration key of a product consists of the composite key values, which describe the different kinds of attribut distinction.


Comment CAD drawings are for modeling purposes only

Model Description

Model Description Abbreviated description of the CAD model


IGS Also mentioned as IGES ( Initial Graphics Exchange Specification). Common program indipendent interchange format for 3D CAD data.


Step Also mentioned as STEP ( Standard for the Exchange of Product Model Data). Common program indipendent interchange format for 3D CAD data standardized according ISO standard.


Parasolid Parasolid modeling kernel is a 3D CAD systems. It is developed by a separate business unit within the Unigraphics Solutions (UGS), now Siemens PLM Software.


DXF (Drawing Interchange Format) is a specified by the Autodesk file format for CAD data exchange, and was developed for the 2D-CAD program AutoCAD. A DXF file describes a CAD model as plain text to the ASCII standard.

Dimensions [mm]

CH version

EU version


Distribution unit with 5 outlets

Attenuation loss

Short Table of Variants FLBB Open complete table FLBB

Terminal Version with Order Number

Variant Details

The link on the respective order number refers to a separat tab with specific detailed information .
This assures better readable information of the selected product.
Change to the tab All Products in order to show details of another variant.
This approach offers to use generic alias link to the product details:
www.schurter.xx/art/ [Order Number]
where the following variables are used:
- xx is the country specific domain
- [Order Number]

A=Most Popular

A=Most Popular

Most popular products have the following customer benefits:
- previously ordered by multiple customers
- generally in stock for immediate delivery
- early adoption or mature life cycle
Contact us for availability on other product variants, lead-times vary:
Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity:
Stock Check SCHURTER

Free Sample

Free Sample

Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.

Distributor Stock Check

Distributor Stock Check

The following links refers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.
The stock availability at the distributors may also be called up separately and the desired product manually entered.
Stock Check Distributor

Switzerland T13, 10A 2.5 m cable FLBB-0212-1000 - ...
Continental Europe CEE7/VII (Schuko), 16A 2.5 m cable FLBB-0222-1600 - ...
Date Subcategory Language Title Download
White Paper English White Paper Cord retention

prod //cdn.schurter.com